Bushnell TROPHY 119598, Инструкция по эксплуатации

Страница: 6 / 320

6
QUICK START GUIDE: BASIC SETUP STEPS
the sender's "SMTP Type" (with or without SSL), and input the receiver's email
address ("Email Address" screen). Proceed to Step 8.
2 Gmail is a recommended choice of sender. To setup, use "smtp.gmail.com", Port 465, with SSL.
Step 6: Enter the phone number you want the camera to send images to (as a
text message). Make sure you enter only numbers without country code- do not
include any spaces or dashes. Press the
MENU
key to save the phone number
(3)
.
You may enter additional phone numbers if you wish. Press MENU to return to the
MMS screen. Note: only the first phone # can control the camera.
3 If more phone #s are added (in addition to the primary #), turn off the group messaging feature on your phone
(iPhone : Setup>Messages>Group Messaging) (Android : Text Messaging>Settings>Multimedia>Group
Conversations -set to "Off")
Step 7: From the “MMS” or “Email via SMTP” screen, you can also set up an email
address to receive data from the camera (this is the only option when using
SMTP, as receiving images via text is not possible. For SMS/MMS operation, email
is optional in addition to phone (text) receipt of images). Select “Email Address”
then press
OK . Press OK again to begin entering your email address. When
finished, press the MENU key to save it.
Step 8: Test the camera to ensure that you will receive images. With the camera
switched to “
SETUP ”, and a wireless signal confirmed by green bars at the right
of the antenna icon, press the LEFT arrow key. You will see a “Step” display while
the camera snaps and transmits a photo, followed by “Wireless test over!” and a
“Send Success!” or “Communication Err” message. If success is indicated, check
your text messages and/or email for the test image. If the camera displayed an
error message, try the test again, after double checking the steps and settings
listed above. You may also ask your wireless provider to verify that all wireless
related data/numbers as shown in the menus are correct and current.
Step 9: (Optional) From the “Wireless Setting” menu screen, select “Preferences”
and press OK . Select your preferred Image Size (smaller image files are lower
quality but can be transmitted faster/cheaper). Set a “Daily Max Number” to limit
the total quantity of images you receive within a 24 hour period.