Bushnell TROPHY 119598, Инструкция по эксплуатации

Страница: 13 / 320

13
• SETUP mode: Power switch at SETUP position (LCD screen is on).
OFF MODE
The OFF mode is the “safe” mode when any actions must be taken, e.g.,
replacing the SD card or batteries, or transporting the device. You will also
use OFF mode if you connect the camera to a computer’s USB port later to
download your photos/videos. And of course, when you are storing or not
using the camera, you will switch it to OFF. Please note that even in the
OFF mode the WIRELESS Trophy Cam HD still consumes power at a very
low level. Therefore, it’s a good idea to take the batteries out of the battery
compartment if the camera will not be used for a long time.
ON MODE
Anytime after the batteries and SD card have been inserted, you can switch
on the camera. When the power switch is moved to the top position, the
camera will enter into the ON (Live) mode. The motion indicator LED ( pg.
9, “Front View” ) will blink red for about 10 seconds. This interval allows time for
you to close the WIRELESS Trophy Cam HD’s front cover, lock it, and leave
the monitored area. Once in the ON mode, no manual controls are needed
or possible (the control keys have no effect). The WIRELESS Trophy Cam HD
will take photos or videos automatically (according to its current parameter
settings) when it is triggered by the PIR sensor’s detection of activity in the
area it covers.
You can either move the power switch directly from OFF to ON mode, or stop
at the SETUP position first to change one or more settings, then move the
switch to ON after you have finished doing so.
SETUP MODE
In the SETUP mode you can check and change the settings of the WIRELESS
Trophy Cam HD with the help of its built-in LCD. These settings, found in the
SETUP Menu, let you change the photo or video resolution, interval between
photos, switch the time imprint on, etc. Moving the power switch to the
SETUP position will turn on the LCD display, and you will see an information
screen that shows how many images have been taken, the battery level,
camera or video mode, etc ( Fig. 3 , next page) .
NOTE: Always move the power switch from OFF to SETUP mode. It is possible that the