Bushnell Impulse 119900A, Инструкция по эксплуатации

Страница: 9 / 22

9
Note: Notifications and updates are subject to carrier SMS delays. Bushnell recommends reporting any confirmed instance of theft to your local law
enforcement agency. Do not attempt to initiate any physical action or recover the camera yourself by any means, legal or otherwise.
SEND TEST IMAGE
-allows you to transmit a photo (of whatever the lens is currently aimed at) to your smartphone as a test to confirm cell coverage and
connection to the app/website. Pressing OK will change the display to ”CONFIRM SEND OF TEST IMAGE (
NO
/YES)”. Select YES and press OK to send the test
image.
DIAGNOSTICS -
all items in this submenu should be used only by qualified service personnel employed by or authorized by Bushnell, or by the user as
directed by a Bushnell customer service rep when diagnosing or troubleshooting technical issues via phone.
USING FIELD SCAN MODE
Field Scan is a useful special feature which allows hunters to monitor their food plots or field edges (among many other potential applications), by using the
Impulse to capture “time lapse” images or video based on user programming. When the Field Scan mode (last item in the PHOTO Menu) is set to “On”, the
Impulse will take a photo (or record a video clip) automatically at your choice of intervals (for example, once every five minutes) during one or two blocks of
time you set up for each day, without requiring a trigger from an active animal . This has the advantage of giving you the ability to monitor the edge of a
field that might be 50 or 150 yards away from the camera, out of the PIR sensor’s range. The result is an effective range much greater than it would normally
be, with the camera dependent on triggers generated by nearby animals. This is a great tool for hunters to scout an entire field with only one camera. Field
Scan also can be useful for security/surveillance applications and installations.
If an animal does enter the area covered by the PIR sensor and generate a trigger event during a time in between the Field Scan intervals you set, the camera
will capture an image or video just as it normally would, based on your other menu settings (unless PIR mode is set to OFF). Here’s how to setup and use Field
Scan (be sure you’ve set the current time in “Set Time” first, so your Field Scan recording will stop and start at the correct times of day):
1. From the Home (Startup) screen, press the MENU button and select the Photo menu.
2. Press OK, then press the Left arrow key. “FIELD SCAN” will be shown at the top of the screen.
3. Press the Up or Down key to select ON, and press OK. You can now set up your first Field Scan block of time, designated by SCAN: A on the upper left
of the screen. Press the Right arrow key to move to the DLY (delay) setting (upper right of screen). This determines the interval between photos (or
videos, if IMG. TYPE in the SETUP menu is set to Video mode), with a default delay (interval) time of 5 minutes (“05M”). By pressing the Up arrow key,
this can be changed to 10, 15, 30 or 60 minutes between each new photo or video. A one minute delay time (“01M”) is also available by scrolling past
60M, after which the settings begin again at 5 minutes. After setting the Delay time, press the Right arrow key to move to the lower row of the screen.
Here you can set Start (lower left) and Stop (lower right) times, which determines the clock times when the first block of Field Scan recording will
begin and end for each day. You can set these times to the exact hour and minute you want, for a recording “window” that lasts anywhere from just
a minute to a full 24 hours.
4. Set the Start and Stop times, beginning with the Start hour, using the Up/Down arrow keys to change the setting. The hour setting is based on a 24-
hour clock, with “00” hours = midnight, “12” hours = noon, “23” hrs = 11PM, etc. To move to the next setting, press the Right key, change the minute for
the Start time with Up/Down, then on to the hour and minute settings for the Stop time.
5. After you finish setting the Stop minutes, press OK to confirm and save your settings for the first block of Field Scan recording (the screen displays
“SAVED”). To create a second block of time, press OK to return to the Field Scan settings, and press the Down arrow key to select “SCAN: B”. Follow
the same process to set the Delay (Interval) time, and Start and Stop times for Field Scan block “B”. As an example of how you might use these two
available time blocks, you could setup Field Scan time block “A” for the dawn hours from 6 AM to 8 AM, and block “B” to capture images between 5:30
and 7 PM. No Field Scan recording would occur from 8 AM to 5:30 PM, or from 7 PM to 6 AM.
6. Note that for videos, “DLY” is independent of the length of each video recording (set by VID LENGTH in the VIDEO menu)-it’s how often videos are
recorded, not how long each one lasts.
7. Here’s an example of how the camera would operate, based on the following Field Scan settings:
Field Scan: On
Scan: A
DLY: 5M
(Start Time) 06:00
(Start Time) 08:00
Scan: B
DLY: 15M
(Start Time) 17:30
(Start Time) 19:00
These settings would cause the camera to capture a photo (or video, if the camera is set to that mode) once every 5 minutes, beginning at 6 AM,
until the Field Scan “A” block stops at 8:00 AM. Later that day, the camera would take a photo or video every 15 minutes between 5:30 PM and 7:00
PM (during Field Scan block “B”). The next day, the camera would again record an image or video once every 5 minutes between 6:00 and 8:00 AM,