21
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part
15 of FCC Rules. Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection systems)
This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household
waste. Instead, it should be disposed at the respective collection points for recycling provided by the communities. For
you, this is free of charge.
If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and, if necessary, in
turn be disposed of according to the relevant regulations (see also the respective comments in this unit’s instructions).
Further information about the subject is available at your community administration, your local waste collection company,
or in the store where you purchased this equipment.
Note: this Bushnell Impulse Wireless Camera is not designed
or intended for operation or sale outside of North America.
This product features technology licensed from Zipit Wireless, Inc. (“Zipit”), that is
copyrighted work of, and may be patented by, Zipit Wireless, Inc. Copyright 2003-2013
Zipit Wireless, Inc. All rights reserved. Access to the Zipit services may be bound by EULA
and Privacy policies located at
www.bushnell.com
or
www.zipitwireless.com/legal
.
FOR END USER LICENSE AGREEMENT AND TERMS/CONDITIONS OF USE,
PLEASE VISIT WWW.WIRELESSTROPHYCAM.COM
iPhone® is a registered trademark of Apple Inc.
Android™ and Google Earth are trademarks of Google Inc.
AT&T® is a registered trademark of AT&T Inc.
Verizon™ and Verizon Wireless™ are trademarks of
Verizon Trademark Services, LLC
FCC ID (AT&T model): XMR201606EC21A
FCC ID (Verizon model): XMR201609EC21V
Содержание Impulse 119900A
Страница 1: ...Model 119900A for AT T 119900V for Verizon 11 18 I N S T R U C T I O N M A N U A L...
Страница 2: ......