Bush DLED65UHDHDRSA, Инструкция по эксплуатации

Страница: 58 / 64

Troubleshooting & Tips
TV will not turn on
Make sure the power cord is plugged in securely to a wall
outlet. Press the Power button on the TV.
Poor picture
• Check if you have correctly tuned the TV.
• Low signal level can cause picture distortion. Please
check antenna connections.
• Check if you have entered the correct channel frequency
if you have performed manual tuning.
No picture
• TV is not receiving any signal. Make sure the correct
source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV sound is muted. Press the
Mute
button
or increase the volume to check.
• Sound may be coming from only one speaker. Check
the balance settings from
Sound menu.
• Check Sound Output option is set correctly from
Sound
menu.
Remote control - no operation
• The batteries may be exhausted. Replace the batteries.
Input sources - can not be selected
• If you cannot select an input source, it is possible that
no device is connected. If not;
• Check the AV cables and connections if you are trying to
switch to the input source dedicated to the connected
device.
The Image is not centred in VGA source
To have your TV automatically centre the image, enter
the
PC Position
menu in
Picture
menu highlight
Autoposition and press OK . Wait for it to finish. In order
to set the position of the image manually you can use
H Position
and
V position
options. Select the desired
option and use Left and Right directional buttons on the
remote to set.
Product support
Help is always at hand
Product support 56
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.