Bush DAB/FM Radio with Bluetooth, Инструкция по эксплуатации

Страница: 6 / 28

6
Note: The DAB radio station list is stored in the memory and so the next time you
switch your radio on, the station search does not take place. It is possible to scan
manually for stations. Please see page 9.
5. Inserting the batteries (optional). Before installing the batteries (not included)
please ensure that the radio is switched off (slide the power switch on the back to
off) and is unplugged from the mains power supply.
On the back of the radio, push down the two tabs to release and remove the
battery compartment cover.
Insert 4 x 1.5V C-size (also known as LR-14) batteries, making sure to note the ‘+’
and ‘-‘ markings and position the batteries the correct way around.
Replace the battery cover, making sure it ‘clicks’ shut.
If used continuously on battery power, your radio has an approximate battery life
of 5 hours when using good quality alkaline batteries. When the battery power is
low, please switch off the radio and replace the batteries.
For battery operation, please switch off the mains adaptor and remove the mains
power plug from the back of the radio.
Time and date
The first time you listen to DAB radio, the time and date of your product will be
synchronised automatically to that broadcast by the DAB service in 24 hour mode;
which is in line with daylight saving, so there is no need to set the time and date
manually.
If you do wish to set the time and date manually, please see page 18.
Using headphones
You can connect headphones with a 3.5mm plug (not included) to your radio. The
stereo headphone socket can be found on the back of the radio at the bottom. When
you have headphones connected the radio speakers are switched off and all sound is
via the headphones.
Note: Always keep the volume within reasonable limits.