Bush DAB/FM Radio with Bluetooth, Инструкция по эксплуатации

Страница: 13 / 28

13
Telescopic aerial
Please make sure that the aerial is fully extended before you attempt to tune to an FM
station. This will ensure that the maximum signal strength is available when the radio
begins to scan. Extending the aerial also ensures the best possible sound quality.
FM Radio mode
If you are not already in FM mode, briefly press and release the ‘Mode’ button to go to
FM mode (check the display).
If you were listening to an FM station when you switched the Radio off then this station
will be automatically selected when you switch the Radio back on.
Tuning to an FM station
Press and release the ‘Scan’ button on the front of your radio to scan up the frequency
band.
Use the left hand rotary control to fine tune each frequency in 0.05MHz steps.
Note: If reception is still poor adjust the position of the aerial or try moving the radio to
another location.
Changing the Scan setting
In FM mode:
Press and hold the ‘Menu/Info’ button until ‘FM Scan setting’ is displayed. Press the
‘Tune/Select’ rotary control to select. The current Scan setting will have an ‘*’ in the
top right of the display.
There are two different options to choose from:
•
Strong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for
may be missed using this option.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
Use the ‘Tune/Select’ rotary control to choose from the two options available and
press to select. Press and release the ‘Menu/Info’ button to return to the station
display.
Using the FM radio