Bush DAB/FM Radio with Bluetooth, Инструкция по эксплуатации

Страница: 14 / 28

14
Audio mode
The radio will automatically switch between Stereo and Mono, depending on the
quality of the signal being received but you can override this function and manually
switch between ‘Stereo’ and ‘Mono’.
Note: You may wish to select ‘Stereo’ if you are listening to your radio using
headphones.
1. Press and hold the ‘Menu/Info’ button on the front of the radio until ‘FM <Scan
setting>’ is displayed.
2. Use the ‘Tune/Select’ rotary control to scroll to <Audio setting>. Press the ‘Tune/
Select’ rotary control to select.
There are now two different options of ‘Forced mono’ and ‘Stereo allowed’ and the
current setting will have an ‘*’ next to it.
3. Use the ‘Tune/Select rotary control to scroll to choose from the two options
available. Press the ‘Tune/Select’ rotary control on the radio to select.
4. Press and release the ‘Menu/Info’ button to return to the station display.
Storing an FM station preset
Your radio can store up to 10 FM stations in its preset memories for instant access to
your favourite stations.
Note: When you store FM radio station presets, these do not overwrite your DAB
station presets.
1. Tune your radio to the station that you wish to preset (see Tuning to an FM station
on page 13).
2. Press and hold the ‘Preset’ button on the front of your radio. ‘Preset Store
<1: (Empty) >’ is displayed if no previous station has been stored.
3. Use the ‘Tune/Select’ rotary control to scroll to the Preset location that you would
like to store the radio station to (1-10).
4. Press the ‘Tune/Select’ rotary control to select, the display will confirm ‘Preset X
stored’, where ‘X’ is the number of the preset (1-10).
Note: If there is already an existing FM station stored under a preset, it will be
overwritten when you store the new station.
Tune to an FM preset station
In FM mode:
1. Press and release the ‘Preset’ button. ‘Preset Recall <1: >’ is displayed and the
name or frequency of the station stored there, or ‘(Empty)’ if no previous station
has been stored.
2. Use the ‘Tune/Select’ rotary control to scroll to the Preset location and station that
you would like to listen to (1-10). Press and release the ‘Tune/Select’ rotary control
to ‘Select.’ The radio will tune to that station and begin to play.