Page 5
Fitting the batteries in the remote
1:
Remove the battery cover. Insert two size
AAA
batteries so that the
‘+’
and
‘-’
marks match the
‘+’
and
‘-’
marks inside the unit.
2:
Replace the battery cover.
Getting started
1:
The first time you power on the
CDVB52
when
connected correctly you will see the following screen.
2:
Use the / buttons to navigate up or down and the
/ buttons to change the options.
3:
When complete press the
ENTER
button. You will be
asked if you want to complete the installation. Use
the / buttons to select
YES
and then press the
ENTER
button to finish the installation.
4:
A channel search will automatically begin and list
all the available stations.If multiple transmitters are
available select from the pop up menu
(s)
using the
/ buttons, and press
ENTER.
System power ON/OFF
1:
To power the system
ON
or
OFF
press the
STANDBY
button on the remote control
(11)
or main unit
(1)
.
Switching between radio & TV
1:
Pressing the
TV/RADIO
button switches between the
TV
station list & the radio station list.
Volume controls
You can change the volume of your CDVB52 by using
the VOL+ and VOL- buttons on the remote control.
1:
VOL+
will increase the volume and
VOL-
will decrease
the volume.
2:
To turn the volume
OFF
, press the
MUTE
button on
the remote control. To turn it back on, press the
MUTE
button again.
Subtitles
1:
To use subtitles, press the
SUBTITLE
button on the
remote control.
When activated the screen below will be shown.
2:
Use the button to enable subtitles and select from
the available languages using the / buttons.
Press the
ENTER
button to activate.
NOTE:
DON’T FORGET! Subtitles are only shown
when they are broadcast with the programme. Not
all programmes have subtitles.
Using digital text
Many digital channels also provide digital text.
For example this could be information about
programmes
,
the weather
,
news and many other
topics.
1:
To use digital text, press the
TEXT
button on the
remote control. An example is shown on the next
page.
User instructions
+
-
-
+
