BCR35DAB
- 6 -
Power Source
This unit is supplied with an AC adaptor; follow these steps to connect the Power Source.
1. Unwind the power cord of the AC adaptor to its full length.
2. Connect the small end of the AC adaptor to the DC socket
on the left side of the unit.
3. Then plug the AC adaptor into the AC outlet (AC100-240V~,
50/60 Hz). Connecting this system to any other power source
may cause damage to the system. For sufficient ventilation,
keep other objects at least 10cm away from the unit.
4. To switch the unit off completely, turn the power off at the
wall outlet and unplug the ac adaptor.
Preparation For Use
Switching On
Press the " "
button to power on the unit.
Press the " "
button again to switch to standby mode.
Adjusting the Volume
1. To increase the volume, press the
VOL+
button.
2. To decrease the volume, press the
VOL-
button.
Adjusting the Antenna
The antenna should be extended to ensure good reception in both
FM
and
DAB+
modes.
It may be necessary to alter the position of the unit and/or antenna to achieve the best
signal.
Using for Main Operation
AC Adaptor
AC Outlet
DON'T FORGET!
1. Do not touch the AC adaptor with wet hands.
2. Once connected to the power supply, the unit will switch directly to DAB+ mode.
3. Please disconnect the AC adaptor from the power supply if the appliance is not
going to be used for a long period time.
DON'T FORGET!
Make sure the antenna is at full length for good reception.