Bush Hog TOUGH MPG-600 Скачать руководство пользователя страница 28

Страница: 28 / 52

OPERATION

MPG PLUGGER 09/20

Operation Section 4-2

MPG-600 AND MPG-720 AERATOR PLUGGER

OPERATION INSTRUCTIONS

Your plugger should now be assembled and inspected for any evidence of defective or damaged parts before

use. Any evidence of damage should be reported to your dealer immediately.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper

implement use to the operator. Pictures contained in this section are intended to be used as a visual aid to

assist in explaining the operation of a plugger and are not necessarily of this implement. Some pictures may

show shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place

and in good operational condition. The operator must be familiar with the plugger and tractor operation and all

associated safety practices before operating the plugger and tractor. Proper operation of the plugger, as

detailed in this manual, will help ensure years of safe and satisfactory use of the plugger.

Standard Equipment and Specifications

MPG-600

MPG-720

Working Width

60 inches

72 inches

Hubs

Spoons

Type Hitch

Cat I and QH

Approximate Weight

460 lbs

500 lbs

Maximum Tractor HP

60 PTO

Options

Slicing knife (4 per hub)

Warranty

1 Year

READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS

MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND

IMPLEMENT.

If you do not understand any of the instructions, contact your nearest authorized dealer for a

full explanation. Pay close attention to all safety signs and safety messages contained in this manual and

those affixed to the implement and tractor.

OPS-U- 0001

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious

injury may occur unless care is taken to follow the warnings and instructions stated in the

Safety Messages. Always use good common sense to avoid hazards.

(SG-2)

Содержание TOUGH MPG-600





















































Результаты поиска

Содержание TOUGH MPG-600

Отзывы:

Похожие инструкции для TOUGH MPG-600

Бренды по названию

Популярные бренды

Bush Hog TOUGH MPG-600, Руководство оператора

Результаты поиска

Содержание TOUGH MPG-600

Отзывы:

Похожие инструкции для TOUGH MPG-600

Бренды по названию

Популярные бренды