Service and Maintenance
MS250G, MS500G, MS800G, MS500P, MS800P
Compact Manure Spreader
36
9.6 Main Box Sealing Flap
Periodically check the condition of the front main-box sealing
flap. Replace the sealing flap if the sides or bottom of the main
box are not adequately sealed.
01401
Fig. 28 –
Sealing Flap
9.7 Gearbox
PTO-drive Models
Check the gearbox oil level every 50 hours.
Use a good quality SAE 90 EP (ISO VG 320) gear oil in the
gearbox. The gearbox oil capacity is 12 oz (350 mL).
01404
Fig. 29 –
Gearbox Oil-reservoir Plug
1.
Remove the gearbox shield.
2.
Remove the plug on the back of the gearbox.
3.
Check the oil level (the oil level should be even with the
bottom of the hole).
4.
If required, add oil.
5.
Replace the plug.
6.
Install the gearbox shield.
Drive Belt
WARNING!
Machine shown with shields removed for
illustrative purposes only. Never operate
machine with shields removed.
W001
PTO-drive Models
9.7.1 Adjust the Drive Belt Tension
IMPORTANT! Drive belt deflection should not measure
more than 3/4–1 in. (20–25 mm).
Drive belts transmit PTO power to the drive shaft. The drive
shaft then provides power to the gearbox that drives the beater
bar.
When a belt is in disrepair or loose, the ability to efficiently
transfer power from the PTO to the drive shaft may be affected.
It is important to check the condition and tension of the belts on
a regular basis. Replace a frayed, cracked, or worn drive belt.
Remove the belt-drive shield to check the tension. Use a drive-
belt tension gauge for accurate measurement. If a gauge is not
available, push on the belts with your fingers to observe their
deflection.
01399
Fig. 30 –
Drive-belt Deflection
Содержание MS250G
Страница 44: ...BUSH HOG...