![background image](http://html1.mh-extra.com/html/bush-hog/ms250g/ms250g_operators-manual_2834867016.webp)
Safety
Safety
16
MS250G, MS500G, MS800G, MS500P, MS800P
Compact Manure Spreader
7. CAUTION!
Risk of being caught in rotating parts
resulting in serious injury.
Do not attempt to reach in with the shields
removed while the machine is operating.
Keep hands, loose clothing, and long hair
away.
8. CAUTION!
Read the operator's manual.
Read ALL operating instructions in the
manual and learn the meaning of ALL
safety signs on the machine.
9. WARNING!
Always wear the appropriate PPE when
using this machine.
For example:
• A hard hat
• Heavy gloves
• Hearing protection
• Protective shoes with slip
resistant soles
• Protective glasses, goggles, or a
face shield
IMPORTANT! If parts are replaced that have safety signs
on them, new signs must be applied. Safety signs must
always be replaced if they become damaged, are removed,
or become illegible.
3.10 Replacing Damaged Safety Signs
•
Always replace safety signs that are missing or have
become illegible. Replacement safety signs are available
from your authorized distributor, dealer parts department,
or Bush Hog.
•
Keep the safety signs clean and legible at all times.
•
When you replace parts that have a safety sign (decal) on
them, the safety sign must also be replaced.
Requirements
•
The installation area must be clean and dry.
•
The application surface must be clean and free of grease
or oil.
•
The ambient temperature must be above 50 °F (10 °C).
•
A squeegee, plastic bank card, or similar tool is required to
smooth out the decal.
Procedure
NOTE: Determine the exact position before removing the
backing paper from the decal. If possible, align the
decal with an edge on the machine.
1.
Peel the decal off the backing paper.
2.
Position the decal above the location where it is being
applied to the machine.
3.
Starting at one edge, carefully press the center of the
exposed sticky-backing in place, smoothing it out as you
work from one side to the other.
4.
Use an appropriate tool to smooth out the decal, working
from one end to the other.
Small air pockets can be pierced with a pin and smoothed
out using a piece of the decal backing paper.
Содержание MS250G
Страница 44: ...BUSH HOG...