Easy Spreader
+
Instructions
The
EverGreen
®
s
can be used to apply a wide range of
EverGreen
®
and
Scotts
®
Lawn Builder
products. Refer to separate sheet for
correct settings, or visit
Iovethegarden.com
.
Assembly Instructions
Step 1
Insert the spreader stand into the two holes at the front of the hopper.
Step 2
Push a wheel firmly onto each end of the axle until it clicks into place.
Step 3
Insert straight ends of the arms into the handle making sure the quick release buttons securely locate into the holes of the
handle.
Step 4
Insert the ends of the handle into matching sockets at the rear of the hopper and ensure that the quick release buttons
securely locate into small hopper holes.
Parts List
•
Handle
•
Arms (2)
•
Hopper assembly with axle and rate control lever
