background image

Safety | 1

Instruction Manual COBRA BA 0100 C_EN_en

3 | 36

1

Safety

Prior to handling the machine, this instruction manual should be read and understood. If anything
needs to be clarified, please contact your Busch representative.
Read this manual carefully before use and keep for future reference.
This instruction manual remains valid as long as the customer does not change anything on the
product.
The machine is intended for industrial use. It must be handled only by technically trained personnel.
Always wear appropriate personal protective equipment in accordance with the local regulations.
The machine has been designed and manufactured according to state-of-the-art methods. Never-
theless, residual risks may remain, as described in the following chapters and in accordance with the
chapter Intended Use [

 5]. This instruction manual highlights potential hazards where appropri-

ate. Safety notes and warning messages are tagged with one of the keywords DANGER, WARNING,
CAUTION, NOTICE and NOTE as follows:

DANGER

... indicates an imminent dangerous situation that will result in death or serious injuries if not
prevented.

WARNING

... indicates a potentially dangerous situation that could result in death or serious injuries.

CAUTION

... indicates a potentially dangerous situation that could result in minor injuries.

NOTICE

... indicates a potentially dangerous situation that could result in damage to property.

NOTE

... indicates helpful tips and recommendations, as well as information for efficient and trou-
ble-free operation.

Содержание COBRA BA 0100 C





































Отзывы: