GB
99
5.5 Switch-on delay HAV for Output 2
If the Presence Detector registers movement in the room, the HAV system which is
connected is switched on. The point in time at which it is switched on depends on the setting
at the "Time/HAV" potentiometer.
The Presence Detector offers two possibilities:
Controller in the area between 1 and 10 min.:
- The switch-on delay is defined as 0.5 min.
Example of Application: Ventilator in WC.
Controller in the area > 10 min.:
The switch-off delay depends on the frequency move-
ment is detected.
- Frequent detection of movement causes the relay to be switched on.
Example of Application: Normal office environment
- Detection of movement once, or sporadically, suppresses switching on.
Example of Application: Rarely used file room
60
40
30
15
5
T
1
60
40
30
15
5
T
1
Mode of Operation
