23
Delete group
Dial
Delete last
Delete all
The last number block will be deleted.
The last digit is deleted.
The complete entry will be deleted,
or the previous entry.
A telephone connection is being
established.
To select this function on the touchscreen, please press down in the
centre of the display for a few seconds. A numeric field will then appear
in which you are able to select the numbers 0 to 9 and special symbols
like plus, star, hash or pause. By pressing C you are able to undo a
previous entry.
Phonebook
Since your phonebook is scanned with the first coupling of your mobile
phone with the system, it is immediately available to you and is stored
until you delete the mobile phone from the phone list. The telephone
book data can of course only be seen or changed by you.
The entire list is read aloud to you. With
„STOP“
you can stop the
process and select the respective entry. With
„NEXT“
or
„NEXT
PAGE“
and
„PREVIOUS“
or
„PREVIOUS PAGE“
you can navigate in
the list. With
„DIAL“
the telephone connection will be made. You can
also jump directly to one of the entries shown by activating the entry
number. E.g.:
„SELECT ENTRY THREE“
<Joe Bloggs> is a placeholder for an entry from your phonebook. If
you select a name, you go directly to the respective entry.
Note:
Depending on the type of mobile phone, it is possible that
X
the order of the first names and surnames may have swapped
around after the telephone book has been transferred.
Phonebook
Play list
Dial Joe Bloggs
numbers of the actual telephone number (wait a moment so that the
HFCK can repeat the entry). When you have entered the last number
block of the telephone number, you can check the complete telephone
number once again with the voice command
„PLAYBACK“
.
Here are some more commands:
Numeric field in touch screen mode
