Burstner Ixeo Time IT 590 Скачать руководство пользователя страница 70

Страница: 70 / 274

T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN

Living

6.9

Holder for flat screen

6.9.1

Holder on the column

The holder for the flat screen is attached to a column.

Positioning:

Push the release lever (Fig. 74,2) to the side and turn the holder (Fig. 74,3)
with the flat screen to the desired position.

Press the flat screen slightly upwards and swivel it to the desired position.
Three different inclination angles may be used.

Storing away:

Turn the flat screen back until the holder (Fig. 74,3) engages in the lock
(Fig. 74,1).

6.9.2

Holder with jointed arm

The flat screen is fastened to a jointed arm.

Positioning:

Pull the release knob (Fig. 75,2). The jointed arm (Fig. 75,1) is unlocked.

Swivel flat screen into the desired position.

Take hold of the flat screen at the top and bottom edge with both hands and
set the desired angle of inclination.

Storing away:

Turn the flat screen back into the original position until you hear the holder
(Fig. 75,3) engage in the lock.

Before commencing the journey, place and secure the flat screen and
screen support in the initial position. If the screen holder is installed in a
TV cabinet: Close TV cabinet.

Fig. 74

Holder on the column

Fig. 75

Holder with jointed arm

Содержание Ixeo Time IT 590



















































































































































































































































































Результаты поиска

Содержание Ixeo Time IT 590

Отзывы:

Похожие инструкции для Ixeo Time IT 590

Бренды по названию

Популярные бренды

Burstner Ixeo Time IT 590, Инструкция по эксплуатации

Результаты поиска

Содержание Ixeo Time IT 590

Отзывы:

Похожие инструкции для Ixeo Time IT 590

Бренды по названию

Популярные бренды