Burstner Ixeo Time IT 590 Скачать руководство пользователя страница 61

Страница: 61 / 274

T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN

Living

6.3

External flaps

The external flaps fitted to the vehicle are all fitted with identical locking cylin-
ders. Therefore, all locks can be opened with a single key.

6.3.1

Flap lock with recessed handle

Opening:

Insert key into locking cylinder (Fig. 49,1) and turn a quarter turn. The flap
lock is unlatched.

Remove the key.

Pull on the lock handle (Fig. 49,2). The external flap is open.

Closing:

Firmly close the external flap.

Insert key into locking cylinder and turn a quarter turn. The flap lock is
locked.

Remove the key.

Before commencing the journey, close all external flaps and lock them.

To open and close the external flap, open or close all locks that are fitted
to the external flap.

When leaving the vehicle, close all external flaps.

To open the external flap, pull all the lock handles fitted to that particular
external flap at the same time.

Fig. 49

Flap lock with recessed handle

1 Locking cylinder

2 Lock handle

Содержание Ixeo Time IT 590



















































































































































































































































































Результаты поиска

Содержание Ixeo Time IT 590

Отзывы:

Похожие инструкции для Ixeo Time IT 590

Бренды по названию

Популярные бренды

Burstner Ixeo Time IT 590, Инструкция по эксплуатации

Результаты поиска

Содержание Ixeo Time IT 590

Отзывы:

Похожие инструкции для Ixeo Time IT 590

Бренды по названию

Популярные бренды