Burstner Ixeo Time IT 590, Инструкция по эксплуатации

Страница: 107 / 274

107
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
„
Fully unfold the support underneath the additional cushion with reinforce-
ment plate.
„
Hook the hooks on the additional cushion with reinforcement plate into the
holders on the bench and place the support on the floor.
6.15.8 Conversion L-seating group into transverse bed (Ixeo IT 640)
„
Convert the lift-off table to a bed foundation (see section 6.13).
„
Lay aside the back cushions of the benches.
„
Push the cover of the lateral seat/lateral bench towards the centre of the
vehicle as far as it will go.
„
Place the rectangular additional cushion on the table (between the seat
cushions of the benches, see Fig. 151).
6.15.9 Lying surface of single beds (special equipment)
The two single beds in the rear can be converted into a combined lying sur-
face.
The additional cushions are stored in a cabinet underneath the bed.
„
Take the additional cushion out of the cabinet.
„
Hook the additional cushion (Fig. 152,1) with the holders (Fig. 153,1) into
the panels of the single beds so that a closed lying surface is created.
Fig. 150 Prior to conversion Fig. 151 After conversion
Fig. 152 Additional cushion Fig. 153 Additional cushion holder