24
Basic Maintenance Procedures
The primary chain jack-shaft housing is a sealed unit with a drive chain running in an
oil bath. This unit requires periodic oil change.
There is a self adjusting spring loaded chain adjuster for maintenance free chain life.
To service the primary drive jack-shaft
You must remove the drain plug on the bottom of the inner housing. Allow the old oil to
be drained out. Reinstall the drain plug and tighten. Be careful not to over tighten or
cross the threads. This could cause damage resulting in a leak.
Remove the side cover plug and pour in 1 oz (30ml) of 10w30 engine oil.
Reinstall side cover plug being careful not to over tighten.
Your Burromax TT40 Gas Minibike utilizes
a twist throttle for ease of use and safe
operation. The twist throttle is a
low-maintenance unit; however, it is
important to be sure that it is working
properly before riding. The twist throttle
should return to idle position after
accelerating when you let go of it.
Before you start your minibike, it is always important to check and make sure that the
throttle works freely returns to idle position. If it sticks when released it could lead to a
very dangerous situation where you or those around you could be injured or killed.
Primary chain housing Maintenance
THROTTLE OPERATION
Содержание Burromini-Gas TT40
Страница 18: ...15 Component Locations ...
Страница 34: ...Burromax Gas Powered Dirt Bike 11 2017 WWW BURROMAX COM 1 800 742 1189 ...