© 2019 Burnside Telecom Ltd.
Page 10 of 25
Rev 2.1
Detailed information on commands:
AUTO
(=/?)
*841*[phone number]#
Shorthand way of combining PNUM10=n and CFG8=1, where n is the phone
number. For example, AUTO=0123456789. Also *841*# cancels auto dial.
BATTERY
Returns the state of charge of the batteries.
CFG
n
Read and write configuration setting.
Value of n: Code
Configuration/Function
0
*80*n#
Phone region:
The line characteristics, frequency and cadence of progress tones.
UK=0, IRELAND = 1, SPAIN = 2, NETHERLANDS = 3, GERMANY = 4,FRANCE = 5,
NORWAY = 6, SWEDEN = 7, GREECE = 8, AUSTRALIA = 9, USA = 10
UK is the default for T400 fitted with a BT431A FXS connector. Spain is the default
for T400 fitted with a RJ11 FXS connector.
1
*81*n#
CLI type:
The Caller ID may be sent to the phone from incoming mobile.
0 = None (default)
1 = UK
2 = ETSI
3 = FCC
2
*82*n#
My number sending:
This determines whether the terminal number is declared to the destination being
called.
0 = Use the setting defined by the network (default).
1 = Number is always sent if supported by the network.
2 = Number is always withheld.
3
*83*n#
Dial delay:
This determines the delay after receiving the last DTMF digit until the call is made.
1 to 9 seconds (default 3).
4
*84*n#
Ring cadence for incoming mobile calls:
Four different cadences useful to differentiate between phones in close proximity.
0 to 3 (default 0).
5
*85*n#
Call restrictions (apart from outgoing emergency calls):
Restrict use of the terminal.
0 = No restriction (default).
1 = Inhibit incoming calls.
2 = Inhibit outgoing calls.
3 = Inhibit all calls.
4 = Restrict dialled numbers to match Memories 0-9
5 = Restrict dialled and received (mobile) numbers to match Memories 0-9
