Burnertech INVERTERJET 30M/L, Инструкция по установке / обслуживанию / эксплуатации

Страница: 15 / 24

Installation / Service / User Manual BURNERTECH
14
4.1.2.4 Burner Sequence
The following flowchart (Fan speed control flowchart) shows how the fan speed is controlled during
a complete burner sequence. The basic states are:
•
Stand-by, fan is off or at Continuous Fan speed when this option is selected;
•
Pre-purge;
•
Ignition;
•
Run state, fan speed is controlled by modulation input
, see section “Normal heating mode”.
•
Post purge.
The desired fan speed in Continuous and Ignition mode can be independently programmed.
Flow chart
– Burner sequence