background image

14

SERVICE

We do not recommend you attempt to service or repair any 

tool yourself.  Tool servicing by unqualified personnel will 

void the warranty and may lead to serious personal injury.

DISASSEMBLY OF THE TOOL IS NOT 

RECOMMENDED.  RETURN THE TOOL TO THE 

BURNDY

® 

 TOOL SERVICE CENTER OR BURNDY

® 

  

AUTHORIZED TOOL REPAIR CENTER.  IF YOU 

REQUIRE ADDITIONAL INFORMATION

CALL:  1-800-426-8720

[email protected]

IMPORTANT SAFETY INSTRUCTIONS FOR 

BATTERY CARTRIDGE

1. Before using battery cartridge, read all instructions  

    and cautionary markings on (1) battery charger,

    (2) battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively shorter,  

    stop operating immediately. It may result in a risk of 

    overheating, possible burns and even an explosion.

4. If electrolyte gets into your eyes, rinse them out with 

    clear water and seek medical attention right away. It 

    may result in loss of your eyesight.

5. Do not short the battery cartridge: (1) Do not touch  

    the terminals with any conductive material. (2) Avoid 

    storing battery cartridge in a container with other  

    metal objects such as nails, coins, etc. (3) Do not  

    expose battery cartridge to water or rain. A battery 

    short can cause a large current flow, overheating, 

    possible burns and even a breakdown.

6. Do not store the tool and battery cartridge in

    locations where the temperature may reach or

    exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it is 

    severely damaged or is completely worn out. The 

    battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

When battery pack is not in use, keep it away from other 

metal objects like paper clips, coins, keys, nails, screws, 

or other small metal objects that can make a connection 

from one terminal to another. Shorting the battery terminals 

together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from 

the battery, avoid contact. If contact accidentally occurs, 

flush with water. If liquid contacts eyes, additionally seek 

medical help. Liquid ejected from the battery may cause 

irritation or burns.

Содержание PATMD430LWJAW





















Отзывы: