Burkert 323219, Быстрый старт

Страница: 34 / 41

34
Start-up
You can find the pin assignment of the remote variant in
the chapter “10.6”
10.6 Connection assignment for external
position sensors (remote variant)
Pin Assignment Device end External circuit
1
Sensor
S + + Remote
sensor
Type 8798
2
Sensor
supply –
S – –
3
Serial
interface,
A-line
A A-line
4
Serial
interface;
B-line
B B-line
Tab. 25: Pin assignment, M8 socket, 4 pin
11 START-UP
11.1 Safety instructions
WARNING!
Risk of injury due to improper operation.
Improper operation may result in injuries as well as damage to
the device and the area around it.
▶
Before start-up, ensure that the operating personnel are
aware of and have completely understood the contents of
the operating instructions.
▶
The safety instructions and the intended use must be
observed.
▶
Only adequately trained personnel may start up the system/
device.
11.2 Defining base settings
The base settings of the positioner are configured in the factory.
To adapt the positioner to the local conditions, the X.TUNE
function must be executed after installation.
Type 8791 REV.2
english