PlusConnect™ GatesAir ZXA Installation and Operation Manual
6
For the latest firmware updates, visit www.burk.com.
Installation
After entering the configuration settings, you are ready to install the PlusConnect in its permanent
location. Simply connect the PlusConnect unit to your LAN and power it on. The PlusConnect will
automatically begin reading data from the transmitter.
Software Configuration
Now that the PlusConnect is installed on the network and connected to the transmitter, you are ready
to add the PlusConnect to the ARC Plus using AutoLoad Plus. AutoLoad Plus is included with the ARC
Plus, and may also be downloaded from www.burk.com.
Configuration involves:
Adding the PlusConnect unit to the ARC Plus site
Mapping PlusConnect parameters to unused ARC Plus channels
Adding the PlusConnect Unit to the ARC Plus Site
Adding a Plus-X device in AutoLoad Plus
In order for the ARC Plus to recognize the PlusConnect, the PlusConnect must be added to the site:
1.
Open AutoLoad Plus and connect to the ARC Plus site to which you are adding the
PlusConnect.
2.
From the
Edit
menu, select
Plus-X Devices
to open the Plus-X device configuration dialog.
3.
Click
New…
to add the PlusConnect to the site.
