bureau veritas 2300 LPH, Руководство пользователя

Страница: 7 / 36

Page 5
If the main tank LED is in red, refill with the external filter recovered water and complete
with distilled or osmosis water (never tap or bottled water).
INTRODUCE WATER IN THE MAIN TANK UNTIL THE MAIN TANK LED
TURNS GREEN.
WARNING:
ALWAYS USE THE ADEQUATE FUNNEL.
THE USE OF CONTAMINATED CONTAINERS OR FUNNELS (RESTS OF OIL, FAT,
DETERGENTS) CAN DAMAGE THE INTERIOR OF THE MACHINE, CAUSING HIGH
QUANTITY OF FOAM, RESULTING IN A BREAKDOWN (NOT COVERED BY THE
GUARANTEE).
Be careful not to spill LIQUID on the ELECTRICAL PANELS.
IF THE WATER OVERFLOWS OR SPLASHES, CAN DAMAGE ELECTRONIC
PARTS OF THE MACHINE.
* FIRMLY CLOSE THE CAP.
The gas is very volatile, so if it is not properly closed, it will scape.
* It will be necessary to add water each time that the machine level shows:
Red colour LED = Lack of water.
It must be filled in until GREEN LED comes on.
ONCE GREEN LED COMES ON, STOP IMMEDIATELY.
IF THE LED IS RED COLOUR, THE MACHINE WILL NOT ALLOW TO START THE
CLEANING CYCLE.
4) Place the tube that injects the Ortho-Oxyhydrogen gas to the engine intake.
VERY IMPORTANT:
The aim is to introduce the Ortho-Oxyhydrogen gas into the combustion chamber,
ensuring that there where you place the tube, there is aspiration and there is no
leakage. We can also introduce it through the air filter directly, by entering some tube
centimeters inward.