bureau veritas 2300 LPH, Руководство пользователя

Страница: 9 / 36

Page 7
- The decarbonising machine will start the programmed cleaning cycle until
completing the cycle.
*The only way to start a new cleaning cycle, after the last cycle, is turning off the machine
(switches position 0).
PRESSURE SWITCH
AT THE BEGINNING OF EVERY CLEANING PROCESS IT IS
INDISPENSABLE THAT THE USER HAS UNDER CONTROL THE
PRESSURE GAUGE.
This machine is equipped with an automatic pressure switch.
They are factory calibrated: between
6 - 8 PSI
These pressure gauges, even being made with membranes and specific
materials for our use, it may happen that they misplace during the first
cleanings due to temperature variations (expansion and contraction).
Therefore, they have been located in a visible and accessible place, so they
can be readjusted if necessary.
Access to the pressure switch: in the back side of the machine.
When should be the working pressure re-
adjusted:
When the machine stops before the
manometer displays: 4-6 Psi
This adjustment may be necessary during
the first cleanings (hours or days),
depending on many factors that not
necessarily have always to happen.
If the pressure exceeds the established limits, LEDs will turn flashing blue, a
bip will also sound. The machine without electronic does not have LED lights,
so in that models only a bip will sound.