Burco 111715, Инструкция по эксплуатации

Страница: 14 / 24

14
If the cut-out operates, allow the unit to cool down, carefully tilt the unit as there may be water in either the
top or bottom sections, then press the red reset button situated underneath the base.
9.0 Descaling & Cleaning Advice and Information
ALWAYS TURN OFF THE POWER SUPPLY AND REMOVE THE PLUG BEFORE CLEANING,
ALLOW THE HAND WASH TO COOL
THIS HAND WASH IS NOT WATERPROOF
DO NOT USE A WATER JET SPRAY TO CLEAN THE INTERIOR OR EXTERIOR OF THE
APPLIANCE, OR USE A WATER JET IN THE VICINITY OF THE APPLIANCE
To proficiently clean the product, follow these instructions
•
Lift out the bowl by the edges raising it the upper section and sliding it up the water spout. When it is high
enough, rotate the bowl and spout until clear of the opening of the upper section.
•
Locate the quick release fitting, this is the large white plastic fitting joining two pipes.
•
Ensure that the bezel is unscrewed to its fullest extent.
•
Grip the white fitting and firmly push the plastic ring at the top of the fitting into the body of the fitting.