Burco 111715, Инструкция по эксплуатации

Страница: 15 / 24

15
This will release the lock and allow the upper pipe to be removed. Then push the lower ring into the body
of the fitting and remove the fitting from the lower pipe.
•
Release the catches and separate upper and lower sections.
Note: Never clean the unit when it is still hot - wait for it to cool completely to avoid any chance of burns.
Exterior
•
Clean with water and detergent. Do not use harsh abrasive cleaners as this could damage the surface
finish.
Interior
•
Brush any scale or sediment from the element and rinse thoroughly with clean water.
9.1 Descaling
In hard water areas scale will form on the element and interior. This will adversely affect the operation of the
hand wash if allowed to accumulate. Descale on a regular basis, using a proprietary descaler recommended for
stainless steel kettles. Follow the instructions provided with the descaling product, and then refill with fresh
water, heat and discard the water before general use. This must be done three times. Do not use the descaler
unless the manufacturer specifically states it is suitable for water boiling applications.
IMPORTANT: Failure to descale will invalidate your guarantee.