Page 4
For technical questions, please call 1-888-866-5797.
Item 56330 56252
Specifications
Battery Rating
3.7V / 1200mAh
Battery Type
Li-ion
Delay Time
30 Seconds
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the
following pages, refer to
Parts List and Diagram
on page 4.
Installation
1. Decide where you want to mount the Light.
Set the Light in a location that receives full,
direct sunlight, a minimum of eight hours a day.
2. Peel sticker off the back of the Light and place
on a solid surface capable of supporting the
unit and secure enough so that it will not
move when exposed to vibrations or wind.
Note:
The Light must be high enough to allow
for motion detection and light distribution.
Initial Battery Charging
Before the Security Light can operate properly, the
battery needs to be fully charged. To charge the battery:
1. Turn OFF the Power Switch.
The battery will recharge without turning on
the light while the Power Switch is off.
2. Allow the battery to charge for
3 days of full sunlight.
Functions
Adhesive
Strip
Solar
Panel
Motion
Sensor
LED
Lamps
Power Switch
(not shown)
SAFETY
OPERA
TION
MAINTENANCE
SETUP
