Page 7
For technical questions, please call 1-888-866-5797.
Item 56330 56252
Troubleshooting
Problem
Possible Causes
Likely Solutions
Light won’t
turn on.
1. Power is not on.
2. Battery not fully charged.
1. Check that Power Switch is set to ON.
2. Keep solar panel clean. Allow to charge in full
sunlight for 3 days with the Power Switch OFF.
Light turns on
during day.
Light is positioned in
a dark location.
Move light to a location that is lit during the day.
Light flashes
on and off with
clicking sounds.
Low battery.
With Switch set to “OFF”, allow to charge in full
sunlight for 3 days before further use.
Light stays
bright.
Frequent changes in
heat being detected.
Check sensing area for possible heat sources
such as air vents, vehicles or objects in wind.
Reposition the Motion Detector Light if needed.
Light brightens
and darkens
continuously.
1. Changes in heat are being
detected from a fixed heat
source or moving object.
2. Sudden temperature change
due to storms or high winds.
1. Check sensing area for possible heat sources
such as air vents, vehicles or objects in wind.
Reposition the Motion Detector Light.
2. Turn Power Switch “OFF” until storm
passes. Mount in a sheltered location.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect power supply before service.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only, and are not available individually
as replacement parts. Parts may not be interchangeable. Specify item number when ordering.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
