sprint-3000-manual-e
Page 5 / 12
Intended Use of Machine
Aqueous-alkaline or acid etching of printed circuit boards or plates.
Developing of positive or negative-working, aqueous-alkaline processable photoresists or laminates
(add defoamers if needed).
Alkaline resist stripping (additional filtration unit required).
All other applications require our written consent, or are performed completely on the operator's own
risk.
Technical Data Sprint 3000
Electrical connection:
220 V~, 50 Hz, approx. 1500 W
Dimensions:
LxBxH 1100 x 750 x 750 mm³ (1500mm with underframe)
Weight:
85 kg
Materials:
PVC, PP, Titanium
Etching format:
300 mm x endless
Etching Tank Capacity:
approx. 20 l etching agent
Etching length
250 mm, 6 top/bottom nozzles in 2 x 4 rows 2-1-2-1; 3,15 l/min per
nozzle at 0,5 bar = 37 l/min
Pump:
1 magnetic drive centrifugal pump with 80l, approx. 0,5 bar
Closed-Loop-Rinse:
Approx. 15l tank, 1 nozzle row top/bottom with 2 nozzles each, approx.
12,6l/min, 1 magnetic pump with 40l/min troughput, approx. 0.5 bar
Fresh water rinse:
via magnetic valve
Transport:
step-less adjustable from 0 - 2 m/min, 50mm roller distance
Heater:
1 x 800W Titanium heaters, limited to 45°C
Safety instructions
General
Please read the following instructions carefully and pay particular attention to information on operating
safety and set up.
Keep these instructions at a safe place. It contains information which also refer for later maintenance
and cleaning.
The machines are intended for chemical-physical treatment of printed circuit boards.
The machines are not designed to be embedded or interconnected with other machines or systems.
They may only be used in specially equipped rooms and be operated only by qualified staff. Children
and pets are to be kept away!
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
