Factory Reset
1)
Unplug the EvolveNet Router.
2)
Press the yellow pushbutton while you re-plug in the EvolveNet Router.
3)
The LEDs will cycle through the EvolveNet Router Bootup Sequence.
Z-Wave:
This device uses Z-Wave and can communicate with other Z-Wave devices regardless
of the manufacturer. For more information, visit
www.z-wave.com
.
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1)
This device may not cause harmful interference, and
2)
This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by Evolve Guest Controls Inc. could
void the user’s authority to operate the equipment.
Support:
•
Email:
•
Phone: 215-798-1017, ext 5.
