Cold Start On and Off (Degree Select)
Press and hold brake. Press and hold Button #2 until the parking lights flash twice. Release. Press and hold Button
#2. Each parking light flash is a progression in degrees. Flash #1 is -40ºF, flash #2 is -30ºF, flash #3 is -20ºF,
flash #4 is -10ºF, flash #5 is 0ºF, flash #6 is +10ºF, flash #7 is +20ºF. Two quick flash parking light flashes is
Cold Start Off. Release the brake, the parking lights will flash three (3) times. NOTE: Factory setting is OFF.
Door Lock Pulse Length (Long)
Press and hold brake. Next, press and hold Button #3, the parking lights will flash three (3) times. Release. Press and
release Button #1. The parking lights will flash once, the door lock pulse length will be 3.5 seconds of output. Release
the brake, the parking lights will flash three (3) times. (For European type door locks)
Door Lock Pulse Length (Short)
Press and hold brake. Next, press and hold Button #3, the parking lights will flash three (3) times. Release. Press and
release Button #1. The parking lights will flash twice, the door lock pulse length will be 0.7 seconds of output. Release
the brake, the parking lights will flash three (3) times. NOTE: Factory setting is SHORT pulse length.
Tach Mode - ON
Press and hold brake. Press and hold Button #3, the parking lights will flash three (3) times. Release. Press and release
Button #4, the parking lights will flash twice. The Tach Start is programmed ON. Release the brake, the parking lights
will flash three (3) times.
Tachless Mode - ON
Press and hold brake. Press and hold Button #3, the parking lights will flash three (3) times. Release. Press and release
Button #4, the parking lights will flash once. The Tachless Start is programmed ON. NOTE: Factory setting is Tachless Start
ON. Release the brake, the parking lights will flash three (3) times.
Programming Runtime with Brake not Pressed
Press and hold Button #4. The parking lights will flash once for every five (5) minutes you want to program. Release button
at desired runtime. Maximum length, 15 minutes.
ENTERING PROGRAMMING MODE
Make sure your vehicle is not running and the brake is pressed. The brake is to remain pressed as long as you want
to remain in programming mode. The only exception is when a different remote has been learned. The unit will exit
the programming mode simply by releasing the brake and the parking lights will flash three (3) times.
Adding Additional Remotes
Press and hold brake. Next, press and hold Button #1 on the working remote until the parking lights flash once. Release.
Press and release Button #4 on the new remote. The parking lights will flash three (3) times confirming that the new
remote was learned.
Automatic Start - Off
Press and hold brake. Press and hold Button #2 until the parking lights flash twice. Release. Press and release Button
#1. The parking lights will flash twice. The automatic start is programmed OFF. Release the brake, the parking lights
will flash three (3) times. NOTE: Factory setting is OFF.
10
