KlassKeeper – Installation, Operation, and Maintenance Manual
7
© Copyright 2013 CGC Group Inc.
Last Revised April 2020 Installation, Operation, and Maintenance Manual is Subject to Change without Notice.
Dry Walling (when required)
It is permissible to glue or screw drywall directly to the side of the cabinet. Please note that the drywall
screw must not be longer than the drywall thickness plus a maximum 3/8”.
Ensure drywall is not obstructing the swinging access door.
Piping
CAUTION: Piping must comply with all applicable codes and regulations.
1.
Run supply, return and condensate pipe inside the cabinet through the top knockouts
2.
Install isolation valves to permit unit removal for servicing.
3.
DO NOT bend or kink supply lines or hoses (If supplied). Supply and return hoses are fitted with
swivel joint fittings at one end to allow removal for future servicing.
