manualshive.com logo in svg

Bull NovaScale T840 E2, Руководство пользователя, Страница: 106 / 210

Поделиться
Скачать
Bull NovaScale T840 E2 Скачать руководство пользователя страница 106

User Guide 

106 

www.bull.com

2.5-inch Hard Disk Drive (2.5-inch Disk Model)

The hard disk drive bay may contain up to eight hard disk drives.

Caution: 

Do not use any hard disk drive that is not authorized by Bull.

Installing a third-party's hard drive may cause a failure in the server as well
as the hard disk drive.

Figure 46: Hard disk drive bay

1. 

Hard disk drive (First)

2. 

Hard disk drive (Second)

3. 

Hard disk drive (Third)

4. 

Hard disk drive (Fourth)

5. 

Hard disk drive (Fifth)

6. 

Hard disk drive (Sixth)

7. 

Hard disk drive (Seventh)

8. 

Hard disk drive (Eighth)

9. 

HDD cage

Note: 

Fill the slots with hard disk drives sequentially starting from slot 0 (the

rightmost slot). If you start filling from slot 7 or skip filling the intermediate
slot, the indication of DISK lamp will be incorrect.

Содержание NovaScale T840 E2



















































































































































































































Отзывы:

Нет отзывов