Bull NovaScale Blade 2040 Series, Инструкция по установке и эксплуатации, Страница: 94 / 104

76
NovaScale Blade 2040 Installation and User’s Guide
In the Workgroup window or Windows Domain window, select one of the following options:
— No, this computer is not on a network, or it is a network without a domain.
— Yes, make this computer a member of the following domain
— Type the workgroup or domain name in the applicable field and click Next.
Setup installs and configures the remaining operating-system components according to the
options you specified. The status is displayed in the Installing Component window. This process
will take several minutes. Setup finishes copying the files and displays the status in the
Performing Final Tasks window. This process takes several minutes.
• Remove the CD from the CD-ROM drive and click Finish. The blade server restarts.
• Press Ctrl+Alt+Delete and log on. The Server Wizard starts to help you set up and configure any
additional server components on the blade server.
Red Hat Linux Server installation instructions
Complete the following steps to perform a basic installation of RedHat Linux Server.
• On the blade server on which you are installing the operating system, press the CD select button
to associate that blade server with the CD, diskette, and USB port. Then, press the KVM select
button to associate that blade server with the keyboard, monitor, and mouse.
• Insert the RedHat Linux Server CD into the CD-ROM drive. The blade server on which the
installation will take place starts from the CD.
• Select "Okay" to test media.
✏
NOTE
Do not switch the KVM from the blade server until the installation has proceeded to
installing the packages after the About to Install window; otherwise, the mouse will lose
functionality.
• Select "Graphical Mode" to begin
• Select "Okay" to test media. You must test at least one CD in order to proceed. If the media tests
okay, proceed with the installation. Hit "Continue" to proceed.
• In the "Language Selection" window, select the languages in which you want to install the
operating system, and click Next.
In the Welcome to Red Hat Linux window, if you are using the NovaScale Blade 2040 server
with SCSI hot-swap hard disk drives, load the latest Red Hat Linux .
img
file. The image may
be obtained from your support representative or may be obtained from the CD-ROM " NovaScale
Blade 2040 Resource CD ". Copy the image to a diskette and insert the diskette into the diskette
drive when the "Devices" window is displayed.
• In the "Set Root Password" window, type and confirm your root password. Use the root
password only for administration. Enter the root password for the system and click "Next" when
finished.