Bull NovaScale Blade 2040 Series, Инструкция по установке и эксплуатации, Страница: 49 / 104

Installing options
31
11.
If you have other options to install or remove, do so now; otherwise, go to “Completing the
installation” on page 41.
Installing an I/O expansion option
You can add an I/O expansion option to your blade server to give the blade two additional network
connections for communicating on a network.
Attention: When you add an I/O expansion option, you must make sure that the switch modules in
switch module bays 3 and 4 on the system chassis are for the same interface. For example, if you add
the Fibre Channel Expansion Card option to your blade server, the modules in switch module bays 3
and 4 on the system chassis must be Fiber Channel switches, such as the Server Switch Module, and
all other I/O expansion options installed on other blade servers in the system chassis must also be
Fiber Channel interfaces.
The following illustration shows how to install an I/O expansion option on the blade server. The
option is installed near IDE connector 2.
TP00445