Bull NovaScale Blade 2040 Series, Инструкция по установке и эксплуатации, Страница: 63 / 104

Installing options
45
Installing the blade server in the system chassis
Complete the following steps to install a blade in the system chassis.
xx
CAUTION:
Hazardous energy is present when the blade is connected to the power source. Always replace
the blade cover before installing the blade.
1.
Review the information in “General Safety” and “Electrical Safety” beginning on page iii,
“Installation guidelines” on page 19 and “Handling electrostatic discharge-sensitive devices” on
page vi.
2.
If you have not done so already, install any options needed, such as disk drives or memory, in the
blade server.
3. Select the bay for the blade server.
Notes:
a. If the blade server has a SCSI storage expansion unit installed on it, the blade server and
expansion option require three adjacent bays.
b. For NovaScale Blade Chassis: When any blade or option is in blade bay 7 through 14,
power modules must be present in power bays 1 and 2,
and power modules must be present
in power bays 3 and 4.
TP00281
A