Bull NovaScale 9006, Сервисная ведомость

Страница: 13 / 28

Servicing the VGA Kit 11
2. Carefully pull the board out of the server drawer.
mportant The DSIB board is secured to the rear of the server drawer by a
tenon-mortise device. Take care not to damage connectors when removing
the board.
14. Servicing the VGA Kit
With the T10 TORX screwdriver, unscrew the 4 M3 screws ( A ) to remove the VGA bracket
from the DSIB board.
Figure 14. Unmounting the DSIB VGA kit
15. Install the VGA kit
Tighten the 4 M3 screws (A) to secure the VGA bracket on the DSIB board.
Figure 15. Installing the VGA Kit