Bull Escala EL260B, Инструкция по установке и эксплуатации, Страница: 47 / 78

Chapter 3. Installing and removing options
31
8. Orient the expansion card and slide the notch in the narrow end of the card into the
raised hook on the expansion bracket; then gently pivot the wide end of the card into
the expansion card connectors.
If you have other options to install or remove, do so now. Otherwise, go to Completing the
installation on page 34.
3.8.3 Removing the hard disk drive tray
Each hard disk drive has a tray that you can remove when removing the hard disk drive.
Figure 3-8. Removing the hard disk drive tray
To remove the hard disk drive tray, complete the following steps:
1. Read “Safety” on page ix and the Installation guidelines on page 19.
2. Shut down the operating system, turn off the blade server, and remove the blade
server from the Bull Blade Chassis. See Removing the blade server from a Bull Blade
Chassis on page 21.
3. Carefully lay the blade server on a flat, static-protective surface, with the cover side
up.
4. Open and remove the blade server cover. See Removing the blade server cover on
page 22.