Bull Escala EL260B, Инструкция по установке и эксплуатации

Страница: 45 / 78

Chapter 3. Installing and removing options
29
3.8.1 Installing a small-form-factor expansion card
Install a small-form-factor expansion card to expand the I/O capabilities of the blade
server.
Figure 3-6. Installing a small-form-factor expansion card
To install a small-form-factor expansion card complete the following steps:
1. Read “Safety” on page ix and the Installation guidelines on page 19.
2. Shut down the operating system, turn off the blade server, and remove the blade
server from the Bull Blade Chassis. See Removing the blade server from a Bull Blade
Chassis on page 21.
3. Carefully lay the blade server on a flat, static-protective surface, with the cover side
up.
4. Open and remove the blade server cover. See Removing the blade server cover on
page 22.
5. Touch the static-protective package that contains the part to any unpainted metal
surface on the Bull Blade Chassis or any unpainted metal surface on any other
grounded rack component; then remove the part from its package.
6. Orient the expansion card over the system board.
7. Slide the notch in the narrow end of the card into the raised hook on the system
board; then gently pivot the card into the expansion card connectors.
If you have other options to install or remove, do so now. Otherwise, go to Completing the
installation on page 34.