Bull 296/C3, Руководство пользователя, Страница: 23 / 123

Note: When the system rails are fully extended, the rail safety latches on the slide rails lock into place.
This action prevents the system from being pulled out too far and dropped. The following illustration
shows a system drawer in the service position.
2
3
6
1
4
5
1 296/C3 4 Stability Plate
2 19-Inch Rack 5 Front Rack Door
3 Rail Safety Latches 6 System Drawer Release Latch
Returning the 296/C3 to the Operating Position
To return the 296/C3 to the operating position, do the following:
1. Press upward on both rail safety latches, located on each rail. See the illustration on page 7 for the
location of the rail safety latches.
2. Push the system drawer back into the rack until both system drawer release latches have locked into
position.
Note: Ensure that the cables at the rear of the system do not catch or bind as you push the system
drawer back in the rack.
3. If you removed two thumbscrews from the front bezel, replace them.
4. Close the front rack door.
Placing the 296/E3 into the Service and Operating Position
So that you can work on the inside of the system unit, the 296/E3 can be placed on its side. When you
are finished working on the system, return it to the position in which it was placed for user operations.
Attention: The system weighs between 34 kg (75 pounds) and 41 kg (90 pounds). Do not try to lift the
system by yourself.
Chapter 2. Removal, Replacement, and Installation Procedures
7