BÜHLMANN ZHL-16C GF, Руководство пользователя

Страница: 41 / 127

41
ALTITUDE – selection of surface pressure values: SURFACE / SEA. The SURFACE
value assumes the limit pressure, considered to be the surface value,
calculated as the average pressure value before the start of the dive.
The SEA value assumes a constant surface pressure of 1013 mbar.
During the active SEA option, depth indications may differ from other
devices due to the assumed surface pressure of 1013mBar, which may
differ from the actual atmospheric pressure.
GF. LO/HI – percentage values of Gradient Factors (distance from the "M" limit
value).
END OF DIVE – time (in minutes) from the ascent, after which the device stops the dive
mode and goes to surface mode: 0 - 10 minutes
The screen also provides information (not editable) of the currently selected gas mix:
MOD OF DIVE – maximum depth of dive, calculated for the Oxygen partial pressure
1.6Bar, given in meters [m] or feet [ft]
NDL TIME – the time (in minutes) that you can spend on the selected gas mix at the
maximum operating depth (MOD), without the need for applying
a decompression procedure
5.1.2.4 Dive Planner – NTX DIVE PLAN.
Planner is a module that calculates decompression stops, based on a decompression
algorithm, using data from the gas mix table. Before using the planner, it is necessary to
correctly configure the gas table as it is used by the algorithm to select the optimum gas
mix at the given depth, at the particular moment of the decompression process. Gas mix
selection is automatic (only active gases in the table - "act").
Before planning, you need to set the following
parameters:
Depth – depth of a dive
Time – bottom time
For information purposes, the input
parameters of the decompression algorithm
are shown:
Start CNS – initial central nervous system load