BÜHLMANN ZHL-16C GF, Руководство пользователя

Страница: 111 / 127

111
8.1.2.7 System settings – SYSTEM SETUP.
Go to changing the device mode.
Go to compass calibration.
Go to firmware upgrade.
UNITS – choice of units: IMPERIAL or METRIC
BRIGHTNESS – screen brightness: LOW / MEDIUM / HIGH / AUTO. Selecting AUTO mode
controls the brightness of the screen, depends on the outside lighting –
the stronger the light, the higher the screen brightness
DATE – set the current date in format: day.month.year
TIME – set the current time in format hour:minute
UW MODE – underwater mode detection: SENSOR / PERMANENT. Selecting the
SENSOR option detects the underwater / surface mode using the depth
sensor. Selecting PERMANENT option keeps the device underwater
permanently. This feature is applied when the depth sensor is damaged
(so it does not go into surface mode and stops the dive) and when testing
on the surface features of the unit specific for underwater mode
TTS MODE – selects the "time to surface" (TTS) calculation mode. Available modes:
CURRENT GAS - TTS based on current gas; LIST OF GASES - TTS calculated
from the optimum gas selected from the gas list (gases marked active)