AWELD160 ARC Welder Assembly & Operating Instructions
3
FEATURES:
•
Power switch lights up to tell you the power is on
•
Thermal overload protection with yellow indicator light
•
6.5 ft welding cable
•
5 ft. ground cable with clamp
•
Easy carry handle
•
Duty cycle: 10% @ 160 amps (230 volts)
•
Electrode capacity: 5/64" to 5/32" (2-4 mm)
•
Weldable materials: mild steel, cast iron, stainless steel
•
Material thickness: 18 gauge (1/4" thick)
•
Includes face shield, chipping hammer with wire brush
SPECIFICATIONS
• Rated Current
55 Amp-160 Amps
• Rated Voltage
230 V 60 HZ
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS
PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are missing
or broken, please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
Keep your work area clean and well lit.
Cluttered work benches and dark work areas may cause accidents or
injury.
Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to
lose control.
Wash hands after handling the cord.
Touching the cords could expose you to lead, which is known in the
State of California to cause cancer, birth defects and other reproductive harm.
Keep children, and other distractions at a distance while operating power tools.
