AWELD160 ARC Welder Assembly & Operating Instructions
2
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
What You Need to Know About Safety Instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible
conditions and situations that may occur. Common sense, caution and care must be exercised when
assembling or using this product.
Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you
do not understand.
GENERAL PRODUCT SPECIFICATIONS
Dimensions 14 ½” x 9 3/4” x 10”
Welding Current
55 ~ 160 Amps (AC operation)
Absorbed Power
5.4 Kilowatts
Power Requirement
230 VAC, single phase, 60 hz
Duty Cycle
10% @ 160 Amps (AC)
Power Consumption
230 VAC/ 60 Hz / Single Phase
Open Circuit Voltage
48 VC
Thermal Overload Protection
AC setting: 10 minutes shutdown; 3 minutes back on
Cables
Ground: 4 AWG, single insulation, 6’.........Torch: 4 AWG, single insulation, 6’
Accessories
Handle / Wire Brush /Face Shield
Weight 39.6
lbs
WARNING! Always wear eye, hearing, and breathing protection!
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
