Buell 2006LIGHTNING MODELS, Руководство по обслуживанию, Страница: 232 / 638

2-106 2006 Buell Lightning: Chassis
HOME
ASSEMBLY
1. Install sidestand leg (1).
a. See
Figure 2-132. Lubricate sidestand pivot bolt (5)
and mating portions on sidestand bracket (2) with
WHEEL BEARING GREASE (Part No. 99855-89) as
shown in
Figure 2-132.
b. See Figure 2-133. Apply LOCTITE 272 (red) to
threaded area (clevis) of sidestand leg.
NOTE
Applying LOCTITE to threaded area of clevis on sidestand
leg, instead of threads on the pivot bolt, will eliminate build-up
between clevis and sidestand bracket which can interfere with
the applied lubricant.
c. See Figure 2-131. Install sidestand leg (1) and side-
stand pivot bolt (3) tightening to 18-20 ft-lbs (24-
27 Nm).
d. Retract sidestand leg.
e. Install spring extension plate (4) and sidestand
spring (2) using SNAP-ON SPRING TOOL (Part No.
HE-52B).
NOTE
Extension plate should curve away from primary chain adjust-
ment screw to allow for clearance around adjustment screw.
INSTALLATION
1. Install sidestand to frame tightening the sidestand
bracket fasteners to 25-27 ft-lbs (34-37 Nm).
2. Install muffler. See Muffler and Straps in 2.31 EXHAUST
SYSTEM .
3. Inspect sidestand.
Figure 2-131. Sidestand Assembly
Figure 2-132. Lubricating Points (Shaded Areas)
Figure 2-133. Threaded Area for Loctite Application
1. Leg
2. Spring
3. Sidestand pivot bolt
4. Extension plate
5. Bracket
6. Bracket fastener
b0946x2x
3
b0946d2x
2
1
4
5
6
b1128x3x
b1127x2x