Buell 2006LIGHTNING MODELS, Руководство по обслуживанию, Страница: 128 / 638

2-2 2006 Buell Lightning: Chassis
HOME
TORQUE VALUES
ITEM TORQUE NOTES
Axle (front) 39-41 ft-lbs 53-56 Nm ANTI-SEIZE, Left handed thread, page 2-17
Axle (rear)
Follow special instructions, ANTI-SEIZE, page 2-
20
Axle pinch fastener, rear 40-45 ft-lbs 54-61 Nm page 2-20
Axle pinch fasteners, front 20-22 ft-lbs 27-30 Nm page 2-17
Brake hand lever housing fasteners 80-90 in-lbs 9-10 Nm page 2-31
Brake lamp switch fastener, front 7-10 in-lbs 0.8-1.0 Nm page 2-31
Brake line p-clamp fastener, front 36-60 in-lbs 4-7 Nm page 2-33
Brake line P-clamp on inside of light-
ing module 36-60 in-lbs 4-7 Nm page 2-33
Brake pedal fastener 22-24 ft-lbs 30-33 Nm LOCTITE 272, page 2-27
Brake pin hanger set, front 11-14 ft-lbs 15-19 Nm page 2-35
Brake pin hanger set, rear 11-14 ft-lbs 15-20 Nm page 2-44
Brake pin plug, rear 24 in-lbs 2.7 Nm page 2-44
Caliper banjo bolt, front 16-20 ft-lbs 22-27 Nm metric, page 2-33
Caliper banjo bolt, rear 16-20 ft-lbs 22-27 Nm page 2-42
Caliper bleeder valves 36-60 in-lbs 4-7 Nm metric, page 2-28
Caliper carrier, rear 24-26 ft-lbs 32-35 Nm page 2-21
Caliper fasteners, front 15-19 ft-lbs 20-26 Nm page 2-35
Caliper mounting fasteners, front 35-37 ft-lbs 47-50 Nm page 2-35
Caliper mounting large fastener, rear 18-21 ft-lbs 24-28 Nm page 2-45
Caliper mounting small fastener, rear 14-18 ft-lbs 19-24 Nm page 2-45
Chin fairing fasteners 36-48 in-lbs 4-5 Nm page 2-90
Clutch cable fitting to primary 36-108 in-lbs 4-12 Nm page 2-71
Clutch cable p-clamp 25-27 ft-lbs 33.9-36.6 Nm page 2-72
Clutch cable wire form 84-92 in-lbs 9.5-10.4 Nm page 2-63
Clutch cable wire form 84-92 in-lbs 9.5-104 Nm page 2-72
Clutch inspection cover fasteners 84-108 in-lbs 9.5-12.2 Nm Tighten in a crosswise pattern, page 2-72
Deflector fasteners 24-36 in-lbs 2.7-4 Nm page 2-68
Deflector pivot shaft risers 43-49 in-lbs 4.8-5.5 Nm page 2-68
Deflector, pivot shaft jam nut 39-48 in-lbs 4.4-5.4 Nm page 2-68
Engine shroud air scoop 12-36 in-lbs 1-4 Nm page 2-92
Exhaust header mounting nut 72-96 in-lbs 8-11 Nm page 2-84
Footpeg mount fasteners, rider 108-132 in-lbs 12.2-14.9 Nm page 2-85
Footpeg mount, passenger 25-28 ft-lbs 33.8-37.9 Nm LOCTITE 272, page 2-86
Fork cap 22-30 ft-lbs 30-40 Nm page 2-52
Fork center bolt 22-30 ft-lbs 30-40 Nm page 2-51
Fork clamp, lower 20-22 ft-lbs 27.2-20 Nm LOCTITE 272, page 2-53
Fork clamp, upper 23-25 ft-lbs 31.2-33.8 Nm LOCTITE 272 (red), page 2-55
Fork damper locknut 22-30 ft-lbs 30-40 Nm page 2-51
Front fender fasteners 36-48 in-lbs 4-5.4 Nm page 2-88
Front isolator bolt 49-51 ft-lbs 66-69 Nm page 2-63